Get the best Ball Bearing 6204 2RS for superior protection & smooth operation. High-quality sealed bearing for motors, auto & industrial uses. Check 6204 2RS price & size!
Indicative value per piece. Final pricing depends on requirement, quantity, and supply scope.
Indicative value per piece. Final pricing depends on requirement, quantity, and supply scope.
Review the key product details before requesting a quotation or discussing your requirement with our team.
The Ball Bearing 6204 2RS is the finest way to fully harness the capabilities of your machinery. This product is designed to deliver outstanding performance, minimize wear and tear, and handle both radial and axial loads with an extraordinary level of efficiency. Essentially, the 6204 2RS is a deep groove ball bearing, widely recognized for the breadth of its applications and its solid build. It is the first choice in a wide range of mechanical solutions, such as an air compressor, industrial dust collector, spray booth, thermal spray gun, and blast room. What makes the 6204 2RS bearing truly outstanding is the fact that it bears the 2RS indeks. It means that the bearing is fitted with two pieces of high-grade rubber seals (one on each side). These seals become the seals of the ultimate upgraded 6204 2RS bearing, as they serve to completely prevent the ingress of dust, dirt, water, and other contaminants, at the same time helping to keep the grease that was pre-lubricated inside. Such exceptional seal design greatly contributes to the longevity of the bearing, as well as lessening the frequency of maintenance operations, when compared to open or shielded bearings.
Going for a 6204 2RS ball bearing of great quality is equivalent to opting for dependable operation. It results in smooth and noiseless running even when the conditions are tough, and the speeds are high, thus it is the right pick for the precision type of applications where the performance cannot be sacrificed. Through the design and construction of the product, extreme operating conditions are taken into account so that the equipment needs are planned for lower downtime and reduced operation costs. 6204 2RS bearing supplier and industry leader at the same time. Making use of a 6204 2RS bearing is beneficial if you are either enhancing a current system or manufacturing entirely new machines, as it is a purchase that will not lose its value. If you are a brand-conscious individual, seeking the 6204 2rs SKF equivalent or other similarly high-quality options is of utmost importance in order to achieve the best results. Ball Bearing 6204 2RS is definitely the right choice for performance unveiling and resilience carrying on over time in your highly important working environments.
| Product Name | Ball Bearing 6204 2RS |
| Model Number | 6204 2RS |
| Bearing Type | Deep Groove Ball Bearing |
| Material | High-Grade Chrome Steel (Rings & Balls), Rubber (Seals), Steel (Cage) |
| Inner Diameter (ID) | 20 mm |
| Outer Diameter (OD) | 47 mm |
| Width (B) | 14 mm |
| Weight | Approximately 0.11 kg (varies slightly by manufacturer) |
| Color Options | Metallic with Black Rubber Seals |
| Load Capacity | High Radial Load Capacity, Moderate Axial Load Capacity |
| Compatibility | Designed for shafts with a 20mm diameter, suitable for a wide range of industrial and automotive housings. |
| Operating Temperature Range | -20°C to +120°C (depending on grease type) |
The design features that are employed in the 6204 2RS bearing to meet its objectives include the following:
When considering a ball bearing 6204 2RS price and performance, it's helpful to compare it against other common bearing types available in the market.
| Feature | Ball Bearing 6204 2RS (Our Product) | Generic 6204 (Open/Shielded) | Premium Brand 6204 2RS (e.g., SKF) | Budget/Unbranded 6204 2RS |
| Price | Mid-Range / Excellent Value | Low | High | Very Low |
| Features | Double Rubber Seals (2RS), Pre-lubricated, High Precision | Open or Single Shield (Z/ZZ), Basic Precision, May require external lubrication | Double Rubber Seals, Advanced Materials, Highest Precision, Optimized Lubrication | Double Rubber Seals, Lower Precision, Variable Lubrication Quality |
| Performance | High Speed, Low Friction, Superior Contamination Protection | Moderate Speed, Higher Risk of Contamination, Requires more maintenance | Very High Speed, Ultra-Low Friction, Exceptional Durability & Performance | Variable Speed, Often Higher Friction, Shorter Lifespan |
| Durability | Excellent Lifespan due to Sealed Design & Quality Materials | Shorter lifespan in dusty/wet environments, prone to premature failure | Exceptional, designed for the most demanding applications | Poor, prone to rapid wear and early failure |
| Target Users | DIY Enthusiasts, Small Businesses, General Industrial Use, Automotive Maintenance | Applications with clean environments, minimal load, or where frequent replacement is acceptable | High-stakes industrial applications, aerospace, heavy machinery, OEM | Non-critical applications where cost is the absolute priority, short-term use |
Through our strong Ball Bearing 6204 2RS, you get the performance, resilience, and price-effectiveness all wrapped in one ideal balance. Whereas the low-cost products may look to be the cheaper option at first, their lifespan runs short, and the maintenance level goes up, producing even more cost of ownership in the end. The open or the shielded bearings do not rise to the level of contamination covering and service extension given by the 2RS seals. Our 6204 2RS is of comparable quality and performance for most uses when measured against the leading brands, at the same time, not burdened by their high price. So buying a 6204 2RS bearing online can be the right decision for you, who is looking for a reliable product that will last for a long time.
Electric Motors: Essential for fan motors, general-purpose motors, geared motors, and various small to medium-sized electric machines, ensuring smooth rotation and prolonged service life.
Automotive Industry: Widely used in alternators, water pumps, tensioner pulleys, and certain small gearboxes, offering reliable performance for demanding vehicle applications.
Power Tools: Perfect for drills, circular saws, angle grinders, and other handheld power tools where high speed and durability are critical.
Conveyor Systems: A key component in roller conveyor and belt-driven roller conveyor, providing low-friction movement for efficient material handling.
Pumps: Utilized in various water pumps, fuel pumps, and hydraulic pumps to facilitate smooth impeller rotation and reduce wear.
Agricultural Machinery: Found in components of tractors, tillers, and other farm equipment that require robust bearings for dusty and challenging outdoor conditions.
Home Appliances: Often integrated into washing machines, dryers, dishwashers, and large fans for quiet and long-lasting operation.
Motorcycles & Bicycles: Commonly used as wheel bearings, steering head bearings, or in specific engine components, crucial for smooth and safe operation.
The‍‌‍‍‌‍‌‍‍‌ Ball Bearing 6204 2RS is the finest way to fully harness the capabilities of your machinery. This product is designed to deliver outstanding performance, minimize wea...
Specifications, category context, and inquiry actions are organized clearly so buyers can review product details with more confidence.
From specification clarification to quantity-based discussions, our team supports more practical and commercially relevant inquiry handling.
We help move the process from product review to quotation, planning, and requirement-based supply coordination with better structure.
Common buyer questions before sending inquiries, requesting bulk pricing, or confirming dispatch timelines.
Adding product grade, quantity, and application helps us recommend the right item faster.
Most inquiries are reviewed quickly, especially when product details and quantity are clearly mentioned.
Delivery timelines can vary based on stock, finishing requirements, and destination city.
The 6204 2RS is a deep groove ball bearing with double rubber seals (2RS) on both sides, designed to protect against dust, moisture, and contaminants while ensuring smooth operation.
It has a 20 mm inner diameter, 47 mm outer diameter, and 14 mm width, making it suitable for a wide range of standard applications.
“2RS” indicates two rubber seals, one on each side of the bearing, which help retain lubrication and prevent entry of external particles.
It is commonly used in electric motors, pumps, gearboxes, fans, conveyors, and automotive components.
Yes, it comes pre-filled with grease, allowing immediate installation and reducing maintenance requirements.
It offers longer service life, reduced maintenance, better protection from contaminants, and reliable performance in dusty or moist environments.
Continue browsing similar industrial products from the same category for faster comparison and inquiry planning.
Share your application, quantity, or specific buying requirement and get a faster response for quotation support.